A Cardiff manufacturing company has been fined £15,000 after a worker lost the tip of a finger while using an unguarded drill.
Vaughan Thomas, 21, from Caerphilly, was working at MIB Manufacturing Ltd’s factory on Rising Sun Industrial Estate, Blaina, when the incident happened on April 26, 2011.
Abergavenny Magistrates Court heard it was Mr Thomas’ first time working at the Blaina factory and he had been sent there to work placing and tightening bolts and screwing boards onto steel panels.
However the panels were not yet ready and Mr Thomas was instead sent to help another employee who was drilling holes into steel frames.
He was asked to help load and unload the steel and was given gloves to wear. During the morning the employee carrying out the drilling was called away and Mr Thomas took over. It was during this time that his right glove became entangled in the drill bit, resulting in the loss of the top of his ring finger down to the first knuckle.
The Health and Safety Executive (HSE) prosecuted the company which produces light steel frames and panels for the building industry, after an investigation revealed it had failed to ensure its workers were protected from dangerous parts of machinery.
HSE’s investigation revealed that Mr Thomas had not received any information, instructions or training on using the drill and that it had been unguarded at the time of the incident. Also the operation of the drill had not been risk assessed and there was no formal system in place for checking the drill guard.
MIB Manufacturing Ltd of Rhymney River Bridge Road, Cardiff, pleaded guilty to breaching Regulation 11(1) of the Provision and Use of Work Equipment Regulations 1998 and was fined £15,000 and ordered to pay costs of £9,947. The company was also ordered to pay £3,000 in compensation to Mr Thomas.
HSE inspector Hugh Emment said: “Serious incidents involving inadequately guarded drills are unfortunately too common. As this incident illustrates, the wearing of gloves is often a significant factor as it greatly increases the risk of entanglement and serious injuries.
“Incidents like this often result in the injured person having to deal with significant long term consequences for themselves and their families.
“Employers should ensure that machinery is suitably and sufficiently assessed. This includes taking into account relevant guidance and standards so that all necessary guarding and other risk reduction measures are in place as well as having systems to ensure that controls provided are maintained.”